Installation Steps
Step 1 – Pipe Cutting
Cut the pipe vertically and precisely with Sant-Rifeng pipe cutter.
Step 2 – Rounding & Beveling
Round and bevel the end holes with the Sant-Rifeng plastic reamer.
Step 3 – Sleeving
1. Choose the right size fitting according to the pipe, put the nut over the pipe, side the compression ring over the pipe, make sure the mouth of the nut and the pipe faces the same direction.
2. Push the inserts into the pipe up to the shoulder, take care not to damage the O-ring.
Step 4 – Pressing
Follow the clamp tools instruction; position the clamp jaws so that their ends aligned with the end of the press sleeve. Shut the press clamp and begin the pressing procedure. It can only clamp once.
Services
Want a design? Have technical questions?
Talk To Experts
Sant-Rifeng boasts strong capacity for system solution designing and R&D, which is backed by a team of well-qualified and experienced specialists, many of whom had over decades of practice in the industry. Their professional service and our level of expertise will be at customers’ disposal when require. So whenever you are in need of a design or having any technical questions, We are here for you.
Installation Practice
We are available to provide technical supports and resolve any type of installation problem. There is a range of installation manuals at customers’ disposal that offer simpler explanations and instructions on different systems. Helping you to achieve easier and faster installation is our goal.